Kensa Engineering has supplied heat pumps in applications from small domestic dwellings to large commercial projects, single unit applications to communal systems. Our clients range from private householders, property development companies, housing associations to large blue chip companies. Our capabilities include utilising various energy sources such as water, boreholes or horizontal ground arrays.

Below is a small selection of our case studies detailing some of the projects that Kensa have been involved in.

Case Study — Salisbury Barn Conversion
This development of a barn in Salisbury is located in the grounds of a small manor house. Click here to download the full case study.

Sevenoaks- Barn Conversion
This barn was converted into an up-to-date sophisticated IT office and is heated using an 8kW ground source heat pump.
Click here to download the full case study.

Aberdeen – 4kW on Boreholes
his house uses a single 70m deep borehole to provide energy to a radiator heating distribution. Click here to download the full case study.

Nottingham – 8kW Bungalow on slinkies
This new low energy bungalow in Nottingham is fitted with an 8kW heat pump, providing heat via an underfloor system.
Click here to download the full case study.