The following section includes typical schematics of how a heat pump can be connected. Only the load side is shown i.e. the heating distribution system. It is important to note that the schematics are only general arrangements and hence do not illustrate all required valves or fittings. They are only a guide and should not be used as full installation plans.
Please click the links below for further information:
Individual heat pump with underfloor (single manifold)
Individual heat pump with underfloor (more than one manifold)
Individual heat pump with underfloor systems (fully
controlled zones)
Individual heat pump with domestic hot water via an indirect tank
Individual heat pump with radiators
Communal Plantroom heating.
